Description
The mechanical anti-bridging devices facilitate and regulate the downflow of powders under a storage silo or hopper.
The anti-bridging devices with conical bottom break up the clods and facilitate the flow of the material.
They are the solutions for the issues below:
Segregation Rat hole Bridging Retention
There are 2 principles of conical anti-bridging:
-
Efficiency5
-
Air consumption1
-
Noise level2
Rotating blades:
Conical screw:
Rotaring blades
Integral passage in the output flange
The anti-bridging devices with rotating blades with conical bottom are specially designed to be clamped on hoppers containing poor flowing powders.
The standard cone angle is 60°. It goes with two scraping rotating blades.
Its hollow shaft conception with offset geared motor provides full bore of the bulk material in the outlet flange.
This design makes possible the implementation of standard slide valve or butterfly valve for maintenance purposes.
Conical screw
To boost the flow of powders and the feeding of the extraction screw
In order to carry out an extraction of moist and very clogging powders from a cylindrical and conical storage silo, Palamatic Process offers a mechanical fluidising system with conical screw.
The blade, positioned at the top of the blender ensures the breaking of the sloping and optimizes the useful volume of the hopper.
Also, the screw prevents the bulk material from caking and promotes their emptying.
The main advantage of this anti-bridging device is the implementation of the drive motor at the top of the hopper, which protects the central shaft passage from the powders.
The conception and the design of the screw are defined according to the handled bulk materials. The rotational speeds are slow and are less than 1 meter per second at the periphery.
This equipment is compatible with "Clean In Place" systems and ATEX certifications.
Equipment advantages
- Mechanical extraction without air or vibration
- Under silo mounting by simple flange
- Low power installed
- Tight and silent operation
- Quick installation
- Easy to assemble
- Dosing accuracy
Media
View our equipment in videos
Anti bridging device with conical bottom
View our equipment in photos
Anti-bridging device to help the flow of the materials
Conical anti-bridging device for discharging bulk materials and powders in industrial process lines.
Anti-bridging device with conical screw
Anti-bridging device to avoid bulk powder mass caking.
Conical screw
Conical screw in the anti-bridging device to facilitate the discharge of powders and the feeding of downstream process equipment.
Internal view of the mechanical anti-bridging device
Mechanical device to boost the flow of powders.
Flat mechanical anti-bridging device
Anti bridging device with flat bottom for controlling the discharging of powder into a storage hopper or silo.
Bin activator
The bin activator facilitates the extraction of bulk powders under industrial storage silos.
Electric vibrator
The electric vibrators are used to optimize the extraction of bulk materials and powders.
Pneumatic hammer
The pneumatic hammers are used in industrial production lines involving raw ingredients and bulk materials handling.
Fluidization plate
The fluidization plates are used to ease the homogeneous flow of powders and bulk materials.
Vibrofluidiseur
The vibrating bin aerators are used to facilitate the flow of powders and bulk materials.
Features
Technical specification
Modèles | ØA | ØB | Puissance en kW* |
---|---|---|---|
DEVCY 200 | 200 | 600 | 2,2 |
DEVCY 250 | 250 | 600 | 2,2 |
DEVCY 300 | 300 | 800 | 3,3 |