Sorry, you need to enable JavaScript to visit this website.

Granulator GR-ECD

  • Essai
  • Plan d'accès
    Description
    Granulateur Easy Clean Design

    Granulator GR-ECD

    Easy clean Design Palamatic

    Easy maintenance and cleaning

    The Easy Clean Design GR-ECD granulator is specially designed for companies whose production tools require frequent cleaning.

    The grinding shaft and the calibration trough can be completely removed by means of a guide rail system.

    The guide rails facilitate handling for the operator because the weight of the equipment to be dismantled is not supported. Safety latches and quick-release fasteners ensure safe and secure dismantling.

    The entire design incorporates the prerequisites of hygienic designs such as rounded welding, stainless steel surface finish (minimum roughness), avoidance of retention areas, assembly and quality of the integrated seals.

    GR-ECD granulators are regularly installed in food processing plants where the cleaning phases are performed on a daily basis. The IQF food manufacturing lines integrate granulators, crumblers, shredders to reduce the blocks of bags of IQF products. 

    Models of the GR-ECD range: GR20 et GR50

    Models GR20 GR50
    Dimensions of the passing flange in mm* 200 x 200 300 x 650
    Theoretical rate in m³/h. 2 10

    This easyclean design ensures high production efficiency by avoiding product retention, reduced cleaning downtime, operating reliability and operational safety.

    The Palamatic Process engineering office provides customised solutions for your granulators. We take into account your installation constraints and your flow rates in order to provide you with the best granulation. We define together the appropriate custom-made solution after visiting your site and according to your detailed specifications.

     

    • Precision
      3
    • Rate
      3
    • Hygiene
      5
    Partager la page

    Equipment advantages

    - Extractable trough and shaft

    - Removable grid

    - Interchangeable trough

    - Easy maintenance and cleaning

    - Guide rails

    - Safety strikes for safe and secure cleaning

    View our equipment in videos

    Granulateur GR35 Easy Clean Design

    View our equipment in photos

    Easy Clean Design granulator

    Granulator GR-ECD

    Easy dismantling of the grinding tool.

    Extraction grille granulateur ECD

    Extraction of the grid

    Easy Clean Design granulator.

    Granulateur barreaux

    Easy Clean Design granulator with bars

    The Palamatic Easy Clean granulator is fitted with pre-crushing bars.

    Granulateur sous vide sacs

    Granulator under bag dump station

    Easy Clean Design Granulator from Palamatic Process with manual bag vacuum station.

    Vue intérieure granulateur

    Internal view of the granulator

    Internal view of the granulatorEasy Clean Design manufactured in stainless steel.

    Granulator Easy Clean Palamatic

    Granulator Easy Clean Palamatic

    Palamatic's Easy Clean Design granulator meets the prerequisites of hygienic operation and ensures a high production output.

    Technical specification

    The GR-ECD granulator provides excellent deagglomeration reliability. Designed with high resistance mechanics, it offers not only efficiency and safety of use but also ease of maintenance and cleaning. There is no risk of cross-contamination. The granulator GR-ECD is available in painted steel, 304 and 316L stainless steel and can therefore be adapted to the requirements of each process.

    Characteristics of the granulator:

    • Grid calibration easily removed and cleaned (drawer system)
    • Grille de calibrage facilement démontable et nettoyable (par système de tiroir)
    • Ø crossing adjustable for each product
    • Inlet and outlet flange fully open
    • Apart bearings, sealing with grounding straps and cable glands
    • Scraper blades or chamfered paddles
    • Engine 5.5 kilowatts
    • Rotation speed 60 rev / min (adjustable by inverter)
    Models GR20 GR50
    Passage for material in mm 200*200 300*650
    Theorical troughput in m³/h 2 10
    Engine power in kW 2.2 5.5
    Weight (kg) 190 320

    Come and test our equipment in our test plant

    1. Personal information

    I would like to have more information:

    2. How can we assist you?

    Note that fields marked with a star "*" are mandatory for sending your message.

    Discover the Palamatic Process know-how