Autonomous truck filling line

FTruckMatic® mobile chargers allow carriers and manufacturers to have a backup device to load their trucks and dumpsters, including:

• Load pellets or powders for the plastics industry (PP, PE, etc.)
• Getting rid of bulk bags of non-compliant products
• Filling a tanker truck occasionally with bulk bags
• Load in cement, limestone, bentonite or carbonate trucks in the fields of construction
• Load ingredients such as sugar, milk powder, flour or lactose from food tankers.

The controls are carried out by an on-board cabinet which is located as close as possible to the loading equipment. Many standard options are available: food design, ATEX certification, etc.

Models

Rapid deployment of truck stacking system

The truck loader is brought next to the truck, container or car to be loaded and then deployed using its jacks. The stabilizers are set up to block any movement from the truck filling system.

Depending on the versions chosen, the supply is made in bags, bulk bags or even directly to the front loader.
 

Powering the system

For loading trucks from bags with the FTruckMaticsystem® 01, the operator places the bag on a high shelf, opens it with a safety knife and then pours it into the buffer hopper. A sieve is located in the hopper to avoid feeding foreign objects into the truck.

Truck loading with bulk bags is done with FTruckMatic® 02 or FTruckMatic® 03. Bulk bags are brought over the loading hopper. The bulk bag is either opened by its chute or directly punctured with cutting blades.

The FTruckMatic® 03 system also allows charging directly with the bucket of a front loader. The station is robust enough to withstand accidental contact with the charger. The large-capacity hopper is designed to allow the system to operate while another charger supplies it.

Many flow aids are available to allow easy and controlled flow such as compressed air fluidizers, vibrating mounts, etc.  
 

Loading the tanker

The product is then transferred to the truck via the conveyor screw. It is designed to be easily cleaned between two loads. Depending on the design, it can be completely cleaned with water or solvents.

Containment of truck load

The connection to the truck is made watertight by lowering a loading bellows. This loading handle allows the product to be channeled and avoid creating a cloud of dust over the truck. A level probe attached to its lower part automatically stops the filling at the end of the cycle.

In the case of particularly dusty or explosive products, a dust remover can be shipped to the stocking station. This device removes dust clouds and re-injects the fines into the process. Thus, there is no loss of product.

Options

• Dusting
• Helps with the flow
• Automatic lowering of the watertight connection sleeve
• Larger-capacity loading hopper
• Certification ATEX
• Food certification